Transmitter EC22

for toxic gases, oxygen and hydrogen

Superior technology

The EC22 is a transmitter for monitoring toxic gases, oxygen or hydrogen. The electrochemical sensor provides selective measurement which avoids unnecessarily expensive false alarms. The amplifier electronics provides an interference-free transmission of the measuring signal to the measurement computer. The EC22 is splash-proof (IP54). In very difficult conditions, special accessories can be used to protect the transmitter from damage.

Signal processing

The embedded software of the EC22 linearises the measuring signal and compensates for the temperature impacts. As a result, correct readings are transmitted even with weather-related variations in temperature. In addition, the transmitter can be connected to a gas measurement computer for transmitting Service, maintenance and error messages.

For transmitting the signals, the EC22 uses an analogue (0.2 .. 1 mA / 4 .. 20 mA) or a digital (RS485) interface. This permits the universal use of the transmitters in combination with gas measurement computers of GfG and thus with your safety system such that you and your systems will benefit from the best possible protection.

Variants for each use

EC22 in basic configuration

EC22 D with additional indication of the current gas concentration, visual and audible alarm directly on the display and calibration through the keyboard

The benefits at a glance

  • Gas concentration displayed on transmitter
  • Few cabling required
  • Long service life of sensors
  • Low maintenance effort
  • Status and function display directly on transmitter
  • Calibration by pressing a button without having to open the casing
  • On-site alarm through coloured display and integrated audible alarm

Technical Data

  • Measurement gases: Oxygen (O2), carbon monoxide (CO), hydrogen sulphide (H2S)
  • Measurement ranges e.g.: O2 0..25 vol. %, CO 0..100/300 ppm (further measurement ranges on demand)
  • Measurement principle: Electrochemical Sensor
  • Gas supply: Diffusion or gassing with calibration adapter
  • Response time t90: less than 30 seconds (depending on gas type)
  • Casing: Plastic
  • Weight: up to 325 g (depending on variant)
  • Dimensions: 98 x 120 x 50 mm
  • Protection type: IP54
  • Expected average service life of measuring cell: depending on sensor
  • Ambient temperature: depending on gas type
  • Relative humidity: depending on gas type
  • Air pressure: depending on gas type
  • Output signal: 0.2 .. 1 mA / 4 .. 20 mA / RS485
  • Power supply: 18 .. 30 Volts DC

Related Products

  • GMA200-MW

    The design and configuation of the GMA200-MW gas warning system ensures flexible,simple and clear-ly [...]


  • GMA200-MT

    The design of the gas warning system GMA200 ensures flexible, simple and clearly structured [...]


  • GMA200-MW4

    High-performance gas warning system for various requirements to measure gas hazards


  • GMA 40 Series

    The GMA40 system is a flexible, cost-effective control system for DIN-rail mounting.


Karte der GfG Standorte

GfG Gas Detection UK Ltd.

Unit 8, Griggs Business Centre
West Street, Coggeshall Essex, UK CO6 1NT